this is information on a product in full production. december 2014 docid026936 rev 2 1/9 stth16l06c-y automotive turbo 2 ultrafast high voltage rectifier datasheet - production data features ? aec-q101 qualified ? ultrafast switching ? low reverse recovery current ? reduces switching and conduction losses ? low thermal resistance ? ppap c apable ? ecopack ? 2 compliant component description the stth16l06c-y is developed using st?s turbo 2 600 v technology. it?s specially suited for use in switching power supplies as rectifier and discontinuous mode pfc boost diode for automotive applications. k a1 a2 a1 a2 k to-220ab table 1. device summary symbol value i f(av) up to 2 x 10 a v rrm 600 v t j 175 c v f (typ) 1.05 v t rr (max) 35 ns www.st.com
characteristics stth16l06c-y 2/9 docid026936 rev 2 1 characteristics when the diodes 1 and 2 are used simultaneously: t j (diode1) = p (diode1) x r th(j-c) (per diode) + p (diode2) x r th(c) to evaluate the maximum conduction losses use the following equation: p = 1.06 x i f(av) + 0.036 i f 2 (rms) table 2. absolute ratings (limiting values) symbol parameter value unit v rrm repetitive peak reverse voltage, t j = -40 c 600 v i f(rms) forward rms current 30 a i f(av) average forward current = 0.5 to-220ab t c = 140 c per diode 8 a t c = 135 c per device 16 t c = 130 c per diode 10 t c = 120 c per device 20 i fsm surge non repetitive forward current t p = 10 ms sinusoidal 120 a t stg storage temperature range -65 to + 175 c t j operating junction temperature -40 to +175 c table 3. thermal parameter symbol parameter maximum unit r th(j-c) junction to case to-220ab per diode 2.5 c/w to-220ab total 1.6 r th(c) coupling to-220ab 0.7 table 4. static electrical characteristics symbol parameter test conditions min. typ max. unit i r (1) 1. pulse test: t p = 5 ms, < 2% reverse leakage current t j = 25 c v r = v rrm 8 a t j = 150 c 25 240 v f (2) 2. pulse test: t p = 380 s, < 2% forward voltage drop t j = 25 c i f = 8a 1.8 v t j = 150 c 1.05 1.35 t j = 25 c i f = 16a 2.08 t j = 150 c 1.28 1.64
docid026936 rev 2 3/9 stth16l06c-y characteristics 9 table 5. dynamic electrical characteristics symbol parameter test conditions min. typ max. unit t rr reverse recovery time t j = 25 c i f = 0.5 a, i rr = 0.25 a, i r = 1 a 35 ns i f = 1 a, di f /dt = 50 a/s, v r = 30 v 40 55 i rm reverse recovery current t j = 125 c i f = 8 a, di f /dt = 100 a/s, v r = 400 v 4.5 6.5 a t fr forward recovery time t j = 25 c i f = 8 a di f /dt = 100 a/s v fr = 1.1 x v fmax 200 ns v fp forward recovery voltage 3.5 v
characteristics stth16l06c-y 4/9 docid026936 rev 2 figure 1. conduction losses versus average current figure 2. forward voltage drop versus forward current figure 3. peak reverse recovery current versus di f /dt (typical values, per diode) figure 4. reverse recovery time versus di f /dt (typical values, per diode) figure 5. reverse recovery charges versus di f /dt (typical values, per diode) figure 6. softness factor versus di f /dt (typical values, per diode) 0 5 10 15 0246810 p(w) t =tp/t tp = 0.05 = 1 i (a) f(av) = 0.1 = 0.2 = 0.5 0 10 20 30 40 50 60 70 80 90 100 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 i (a) fm t =150c (typical values) j t =25c (maximum values) j t =150c (maximum values) j v (v) fm 0 2 4 6 8 10 12 14 16 18 0 50 100 150 200 250 300 350 400 450 500 i (a) rm di /dt(a/s) f i =2 x i f f(av) i=i f f(av) i =0.5 x i f f(av) v =400v t =125c r j 0 50 100 150 200 250 300 350 400 0 50 100 150 200 250 300 350 400 450 500 t (ns) rr di /dt(a/s) f i=i f f(av) i =0.5 x i f f(av) v =400v t =125c r j i =2 x i f f(av) 0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 0 100 200 300 400 500 q (nc) rr i =2 x i f f(av) i=i f f(av) i =0.5 x i f f(av) v =400v t =125c r j di /dt(a/s) f 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 50 100 150 200 250 300 350 400 450 500 s factor di /dt(a/s) f i < 2 x i t =125c f f(av) j v =400v r
docid026936 rev 2 5/9 stth16l06c-y characteristics 9 figure 7. relative variations of dynamic parameters versus junction temperature figure 8. transient peak forward voltage versus di f /dt (typical values, per diode) figure 9. forward recovery time versus di f /dt (typical values, per diode) figure 10. junction capacitance versus reverse voltage applied (typical values, per diode) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 25 50 75 100 125 i rm q rr t rr s factor t (c) j i=i reference: t =125c f f(av) j v =400v r 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0 50 100 150 200 250 300 350 400 450 500 v (v) fp di /dt(a/s) f i=i t =125c f f(av) j 0 20 40 60 80 100 120 140 160 180 0 100 200 300 400 500 t (ns) fr di /dt(a/s) f i=i t =125c f f(av) j v =1.1 x v max. fr f 1 10 100 1 10 100 1000 c(pf) v (v) r f=1mhz v =30mv t =25c osc rms j
package information stth16l06c-y 6/9 docid026936 rev 2 2 package information ? epoxy meets ul94, v0 ? cooling method: by conduction (c) ? recommended torque value for to-220ab and to-220fpab: 0.4 nm to 0.6 nm in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 11. to-220ab dimension definitions a f d1 j1 h1 ? p q d l1 l b e e1 e l20 l30 b1 c resin gate 0.5 mm max. protrusion (1) resin gate 0.5 mm max. protrusion (1) (1) resin gate position accepted in each of the two position shown as well as the symmetrical opposites
docid026936 rev 2 7/9 stth16l06c-y package information 9 table 6. to-220ab dimension values ref. dimensions millimeters inches min. max. min. max. a 4.40 4.60 0.17 0.18 b 0.61 0.88 0.024 0.035 b1 1.14 1.70 0.045 0.067 c 0.48 0.70 0.019 0.027 d 15.25 15.75 0.60 0.62 d1 1.27 typ. 0.05 typ. e 10 10.40 0.39 0.41 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.19 0.20 f 1.23 1.32 0.048 0.052 h1 6.20 6.60 0.24 0.26 j1 2.40 2.72 0.094 0.107 l 13 14 0.51 0.55 l1 3.50 3.93 0.137 0.154 l20 16.40 typ. 0.64 typ. l30 28.90 typ. 1.13 typ. ? p 3.75 3.85 0.147 0.151 q 2.65 2.95 0.104 0.116
ordering information stth16l06c-y 8/9 docid026936 rev 2 3 ordering information 4 revision history table 7. ordering information order code marking package weight base qty delivery mode STTH16L06CTY STTH16L06CTY to-220ab 2.23 g 50 tube table 8. document revision history date revision changes 19-nov-2014 1 first issue. 12-dec-2014 2 removed to-220fpab and d2pak package information.
docid026936 rev 2 9/9 stth16l06c-y 9 important notice ? please read carefully stmicroelectronics nv and its subsidiaries (?st?) reserve the right to make changes, corrections, enhancements, modifications, and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant in formation on st products before placing orders. st products are sold pursuant to st?s terms and conditions of sale in place at the time of o rder acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and st assumes no liability for application assistance or the design of purchasers? products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from the information set forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2014 stmicroelectronics ? all rights reserved
|
